Hotpoint mosogatógép hibakódok

AL01

Flood protection system activated

  • Flood protection activated
  • Check pressure switch
  • Check wiring

AL02

Valve or connections - dishwasher will not fill with water

  • Check water supply
  • Check inlet hose
  • Check water inlet valve
  • Check wiring

AL03

Failure to drain

  • Check for blockage
  • Check outlet hose for blockage or obstruction
  • Check drain pump
  • Check wiring

AL04

Thermistor error detected - temperature sensor short, open circuit or out of range

  • Check wiring to thermisrtor
  • Check thermistor

AL05

Circulation pump blocked or faulty

  • Check filters
  • Check circulation pump motor for blockages
  • Check main circulation pump

AL06

Fill timeout

  • Check water supply
  • Check inlet hose
  • Check water inlet valve
  • Check wiring

AL07

Not used

  • This error code is not used on this range of Hotpoint Ultima dishwashers

AL08

Heating timeout

  • Check wash heater
  • Check thermistors

AL09

Software recognition error

  • Reprogram the dishwasher EEPROM
  • Replace electronic control module

AL10

Heating circuit error

  • Check water heating element
  • Check thermostats
  • Check wiring

AL99

Communications error between boards

  • Check wiring between control boards
  • Replace electronic control module

H20

Fill timeout

  • Check water supply
  • Check inlet hose
  • Check water inlet valve
  • Check wiring