Candy mosógép hibakód




ERROR CODE Times
the LED
FLASHES
Seconds
the LED
stays OFF
MOST PROBABLE REASON FOR THE ISSUING OF ERROR CODE:
ERROR 01 1 5 Door Safety Device/Drum's Braking device defective and/or Wiring.
ERROR 02 2 5 The Water Fill Phase was not completed within the designed limit time.Defective Solenoid Valve,Pressostat,Water Fill Hose,Low Water Pressure in the network and/or Wiring.
ERROR 03 3 5 The Water Drain Phase was not completed within the designed limit time.Clogged Filter,Drain Pump,Drain Hose,Wall Discharge and/or Wiring.
ERROR 04 4 5 Several(3)interventions by the Anti-flood Safety Contact of Pressostat.Solenoid Valve blocked opened,defective Pressostat and/or Wiring.
ERROR 05 5 5 NTC Temperature Reading Probe opened or shorted and/or Wiring.
ERROR 06 6 5 Eeprom - Defective "Cuore" Control Module and/or Wiring.
ERROR 07 7 5 Jammed Motor's Rotor and/or Wiring.
ERROR 08 8 5 Defective Tachometric Dynamo (opened or shorted) and/or Wiring.
ERROR 09 9 5 Defective "Cuore" Control Module (damaged Motor's TRIAC) and/or Wiring.
ERROR 10 10 5 Missing dialogue between "Cuore" Control Module and Display board and/or Wiring.
ERROR 12 12 5 Missing dialogue between "Cuore" Control Module and Display board and/or Wiring.
ERROR 14 14 5 Missing Water Heating: defective NTC Probe and/or defective Water Heating Element and/or Wiring.
ERROR 15 15 5 Defective "Cuore" Control Module - Not Programmed "Cuore" Control Module.
ERROR 16 16 5 Water Heating Element is short circuited or defective electrical insulation.
ERROR 17 17 5 Wrong signal from Tachometric Dynamo.
ERROR 18 18 5 Defective "Cuore" Control Module and/or Wiring - Wrong Network Frequency.